Elstar Products

The catalogue of Elstar Products - our own in-house tailored solutions (equipment and software) and the catalogue of equipment we offer as suppliers of specialist equipment from our partners.

Aliquam erat volutpat. Fusce vitae mi in nibh scelerisque hendrerit ut vel quam. Vestibulum aliquet, ex vel aliquet vehicula, urna quam ultricies dolor, eget dignissim dui dolor consectetur quam. Donec elit tortor, pellentesque non massa id, placerat pharetra lacus. Duis faucibus scelerisque convallis. Sed euismod tortor id urna pellentesque, consequat molestie urna viverra. Pellentesque rutrum sapien ac est dignissim pellentesque.

Donec vel quam et sem laoreet dapibus. Quisque eget turpis turpis. Suspendisse urna neque, commodo tristique ultrices vitae, euismod at mi. Nulla pretium sapien tempus lectus gravida fringilla. Nam rhoncus erat erat, ac pellentesque sem pretium luctus. Vivamus sagittis sapien non lacus interdum, sed malesuada purus ultricies. Phasellus ante libero, facilisis et maximus at, lobortis eget erat.

ELSTAR CALSTAR is a multi purpose calibration system designed to work as a stand alone vibration transducer calibrator, a balance facillity bearing pedestal stiffness measuring system or a Cabstar signal line calibrator. 

DytranLogo Blue have been manufacturing accelerometers and force sensors for more than 30 years. Whether you are looking for high temperature (up to 650°C), miniture tri-axial or smart (USB) accelerometers Dytran has a model to suite your requirements.Dytran is also a leading supplier of HUMS accelerometers for helicopters. If you require guidance on selecting the correct sensor for your application just open the Product Configurator or give a call, we will be happy to assist you.

pr6423
emerson logo data offsetis a major world wide supplier of plant instrumentation in the power utility and petrochemical industry.
Elstar Elektronik AG represents Emerson in Switzerland for their machinery protection products.We can assist you in a wide range of aspects involving Vibration and speed protection.Whether it be a single measurement chain or a plant wide protection system we havemore than 30 years of experience in this field.

tiltex fontis ELSTAR's wireless angular measurement module. It is utilised in conjunction with our Orbistar wireless run out measurement system. Simply mount TILTEX on your Rotor using it's built in magnetic mounts, connect wirelessly to Orbistar. TILTEX will continuosly send live angular information.

When acquiring data in a measurement task that requires multi channel data to be collected in a manner suited to different measurement types .

Let's say you are faced with a measurement task where some channels measure vibration on a fixed frequency range at a sample rate of 2kHz and others are measuring temperature say every 10 seconds. If all your channels are locked together  using the same the data acquisition set up, you must choose the vibration set up for all channels. This is just fine for the vibration analysis, but you are taking a way too much data for your temperature channels.

The solution is to set your Corvus system up with two processes one sampling at 2kHz and the one shot every 10 seconds. You just allocate the relevant channels to their measurement process. The measurement system needs to be able to synchronise all processes so that the data can be displayed live or recorded and played back with all channel data with the correct timing.

There are two levels of Corvus:

  • Corvus Lite - Supports up to 268 dynamic or static (machine variables) channels and up to 2 measurement processes.

  • Corvus Full - Supports up to 1024 dynamic or static (machine variables) channels and up to 8 measurement processes that can be distributed on up to 8 data collection PC's.

A system where up to 8 processes can be defined in a single data acquisition station situated remotely (over the Ethernet) up to 100m away from the workstation running Corvus. The channel count is limited only by the capability of the hardware. The data acquisition station can be positioned close to the measurement points reducing cable lengths and thus improving the signal quality.

Data Acquisition hardware: National Instruments PXIe-1082 portable 8 Slot rack with PXIe-8840 controller. A combination of up to 8 different Data Acquisition card types. Analog channel count 128.

Computer: Any PC running Windows 7 SP1 or above. 

A system where up to 6 remote data acquisition stations each running up to 8 processes can be defined. Each data acquisition station can be situated remotely (over the Ethernet) up to 100m away from the workstation running Corvus. The channel count is limited only by the capability of the hardware. The data acquisition stations can be positioned close to the measurement points reducing signal cable lengths and thus improving the signal quality.

Data Acquisition hardware: 6 x National Instruments PXIe-1082 portable 8 Slot racks with PXIe-8840 controller. A combination of up to 8 different Data Acquisition card types per rack. Analog signal channel count 768

Computer: Any PC running Windows 7 SP1 or above. 

This is a highly portable entry level system.You just need Corvus Lite,a Notebook PC and a compact National instruments USB-9234 4 channel data acquisition module and your ready to start measuring.

The USB-9234 has a switchable IEPE constant current supply built in which enables you to connect a wide range of sensors eg. Dytran Accelerometers, directly to the BNC inputs.

This is a very powerfull analyser with recording direct to disk whils displaying real time data in a wide range of plot formats.

Data Acquisition hardware: National Instruments USB-9234.

Computer: Any Portable PC running Windows 7 SP1 or above (Must support at least 1 USB port, Ethernet or Wireless). 

An extremely flexible portable system. You can add up to 32 channels as required to suite your measurement task, or you can mix 2 module types in one compaq Daq chassis as Corvus Lite supports 2 Processes.

Data Acquisition hardware: National Instruments cDAQ-9178 for USB control or cDAQ-9189 for Ethernet control. Up to 8 NI-9234 4 channel modules or a second type of CDAQ module.

Computer: Any Portable PC running Windows 7 SP1 or above (Must support at least 1 USB port, Ethernet or Wireless). 

A powerful rotating machinery analysis system that you can take to site and attach up to 32 dynamic channels or split into two processes and measure dynamic signals such as vibration and a second process for slow changing machine condition signals. Machine runups and rundown can be analysed and at the same time streamed direct to disk so that no data is lost and the data replayed for re-analysis later.

Data Acquisition hardware: National Instruments cDAQ-9178 for USB control or cDAQ-9189 for Ethernet control. Up to 8 NI-9234 4 channel modules or a second type of CDAQ module.

Computer: Any Portable PC running Windows 7 SP1 or above (Must support at least 1 USB port, Ethernet or Wireless). 

Corvus options: Option 1- Ring BufferOption 3- Streamed Data Storage,  Option 18-Rotor Analysis Toolkit

 

elstar starline software

ELSTAR manufactures a comprehensive range of signal analysis equipment with emphasis on machine vibration measurement. This together with representing world class sensor manufacturers allows us to provide you with a complete solution to your measurement, production testing and condition monitoring requirements.   

Rotating Machinery Analysers Starline Sensors

ELSTAR equipment is designed and developed by engineers with extensive experience in the field of machinery diagnostics. This results in supplying measurement equipment that focuses on the practicalities of field measurements.

Elstar has worked closely with several large rotating machine manufacturers to create a range of equipment suited to measuring Balance, Run out, Vibration, Go/NoGo, Machine Condition and more. We have equipment in factory shop floors, large balancing facilities, Nuclear Power Plant as well as in the field of vibration diagnostic.

We also have a team of engineers who have many years of experience of on site machine diagnostics. We would be happy to assist you with our Elstar Services team to solve your rotating machinery problems.

 

ELSTAR offer a range of products concentrating on the rotating machinery industry. We have concentrated our efforts over many years to develop software, hardware and service solutions to assist in increasing efficiency and quality when carrying out vibration analyses or balancing medium to large rotors. We offer a range of standard products which can be scaled to your application or we are happy to work with you developing customised solutions. We have been able to assist companies worldwide with solutions enabling them to increase their efficiency and productivity.

Orbistar advanced Wireless Runout system

Especialy develloped for accurately measuring large rotors, Orbistar is certainly one of the most advanced runout systems available.

Using gauging and eddy current probes attached to a wireless front end unit together with Tiltex our wireless rotor angular sensor, a full range of Runout measurements can be performed.


 

Orbistar logo

is a simple to use mechanical and electrical run out measurement system with the following highlights.

  • Up to two complete (mechanical and electrical) run out channels 
  • Simple probe setup utility with bar graphs 
  • Automatic reporting function with amplitude and phase plots which can be setup to match your company format 
  • Math function for mechanical or electrical subtraction 
  • Eddy probes and mechanical gaging probes supplied with optional cable lengths 
  • Encoder option for hand turning operations 
  • Data acquisition module interface over USB enabling portable (notebook) or fixed installations

Orbistar_Spec_sheet_060115.pdf

 

ELSTAR has wide experience in supplying sensors chiefly in the area of vibration and Rotating machinery applications. These can be broken down ito three catagories.

Corvus is Elstars general purpose, highly scalable vibration signal analyser.

We can deliver Corvus as a compact Lite version set up as a 4 channel portable analyser right up to a Corvus Full version with a configuration of up to a 1000 channels set up as a  multi process distributed analysis system.

With the abillity to be connected to a wide range of hardware suppliers, Corvus makes it simple to meet your measurement requirements.

Corvus is an open system in terms of hardware and supports, but is not limited to, a wide range of National Instrument devices.

There are two levels of Corvus:

Corvus Lite - Supports up to 268 dynamic or static (machine variables) channels and up to 2 measurement processes.

Corvus Full - Supports up to 1024 dynamic or static (machine variables) channels and up to 8 measurement processes that can be distributed on up to 8 data collection PC's.

As a guide, we have put together a series of packages for both levels of systems based on National Instruments hardware.

 

 

Corvus is Elstars general purpose, highly scalable vibration signal analyser.

We can deliver Corvus as a compact Lite version set up as a 4 channel portable analyser right up to a Corvus Full version with a configuration of up to a 1000 channels set up as a  multi process distributed analysis system.

With the abillity to be connected to a wide range of hardware suppliers, Corvus makes it simple to meet your measurement requirements.

Corvus is an open system in terms of hardware and supports, but is not limited to, a wide range of National Instrument devices.

There are two levels of Corvus:

Corvus Lite - Supports up to 268 dynamic or static (machine variables) channels and up to 2 measurement processes.

Corvus Full - Supports up to 1024 dynamic or static (machine variables) channels and up to 8 measurement processes that can be distributed on up to 8 data collection PC's.

As a guide, we have put together a series of Corvus packages for both levels of systems based on National Instruments hardware.

 

We have put together a series of packages for Corvus. These are intended as a guide, as Corvus supports a wide range of National Instruments hardware you can configure your system to exactly suite your measurement requirements.

There are several powerful options available for Corvus to assist you in achieving your measurement task.

Please click Corvus-7-Supported-Hardware.pdf to download list of hardware supported by Corvus.

Corvus supports a wide range of National Instruments Signal sources as well as:

  • Digital interface to Datatel telemetry systems thus eliminating the need for converting data from Digital to Anallog and then back to Digital format.
  • Interface to HBM QuantumX amplifier.
  • Argus data aquisition System. 

 

Equipment & Power Sources for Laboratories

Aliquam erat volutpat. Fusce vitae mi in nibh scelerisque hendrerit ut vel quam. Vestibulum aliquet, ex vel aliquet vehicula, urna quam ultricies dolor, eget dignissim dui dolor consectetur quam. Donec elit tortor, pellentesque non massa id, placerat pharetra lacus. Duis faucibus scelerisque convallis. Sed euismod tortor id urna pellentesque, consequat molestie urna viverra. Pellentesque rutrum sapien ac est dignissim pellentesque.

Donec vel quam et sem laoreet dapibus. Quisque eget turpis turpis. Suspendisse urna neque, commodo tristique ultrices vitae, euismod at mi. Nulla pretium sapien tempus lectus gravida fringilla. Nam rhoncus erat erat, ac pellentesque sem pretium luctus. Vivamus sagittis sapien non lacus interdum, sed malesuada purus ultricies. Phasellus ante libero, facilisis et maximus at, lobortis eget erat.

ELSTAR provides you with a wide range of analog or switching DC Power Supplies, as also 4-quadrant DC Power Supplier with fast analg input with Amplifier functionality.

For AC - Power Sources we can offer 1 and 3 phase, manual and automated devices up to 6kVA

APT PowerSourcesELSTAR is representing since over 10 years Associated Power Technologies.

Associated Power Technologies provides a wide range of manual and automated single und multiple phase AC and DC Power Sources.
These AC Power Source Product Line enable laboratory and production to generate worldwide voltages and frequencies for their products. In usage as Frequency Converters, Variable Transformers, or Variacs. Enables to convert 120 Volts 60 Hertz to 220 Volts 50 Hertz.
Convert three‑phase power to single‑phase power and vise versa. Provides frequency conversion up to 1kHz and create brownout and transient voltage conditions with our Frequency converters.

ARI products ELSTAR is representing since over 10 years Associated Research Inc.

 

Associated Research have the full range of electrical tester in the ARI-Safety Tester Product line to meet your safety compliance needs, such as dielectric withstand, ground continouty, ground bond, insulation resisteance, line leackage current test, meeting following Safety Standards:

• IEC/UL 60601-1 3rd Edition

• UL 1598/CSA C22.2 No. 250.0-08 3rd Edition

• BS EN 60204-1:2006 + A1:2009

• IEC/UL 60335-1 5th Edition

• IEC 60598-1 7th Edition

• IEC/UL 60950-1 2nd Edition

• IEC/UL 61010-1 3rd Edition

We offer:

  • Rotating Machine Analysis, Balancing.
  • Rotating machinery vibration protection systems engineering, full installation and maintainance, advise for installed systems, outage protection system varification.
  • Environmental test laboritory vibration test systems, maintainance,repair, support for testing, schooling.

L.A.B. Equipment, Inc., was established in 1933 and has been recognized for decades as the global leader in the design, manufacturing, and service of product reliability and package testing equipment. This includes drop testers, shock testers, hydraulic vibration, mechanical vibration, incline impact testers; and through our sister company, Techlab Systems, compression testers. All of our equipment meets a large variety of testing standards including ISTA, ASTM, ISO, TAPPI, and MIL-STD, to name a few. We are a team-based organization committed to manufacturing quality products on a consistent basis while maintaining a work ethic and attitude directed towards continuous improvement.

IMV Logo Transp 

offers a wide range of Air- & Water-Cooled Shakers as also under water Shakers or Inertial and Modal Shakers. In the product line of Controllers we find a wide variety of systems and software to controll and analyse test runs.

Enhanced system performance extends test capabilitiesVibration tests have become diversified and specifications have become increasingly strict.
i-series offer a user-friendly lineup with enhanced performance and durability.

ELSTAR Elektronik AG is a manufacturer of one of the worlds most advanced series of mechanical shock test machines.

We can supply a range of machines capable of half sine shock amplitudes of up to 2000g and a repetition rate of up to 60 shocks/min. A major feature of our shock test machines is the ability to produce high quality highly repetitive shocks this makes Elstar Elektronik machine popular where accuracy is paramount. Many machines have been sold to watch manufacturers and to high presision optics suppliers. We are also capable of customising these machines to match individual requirements.

Our IMPALA data acquisition and closed loop control software gives great flexibility and is simple to operate.

Accurate, repeatable waveforms: The STM shock test machine gives results which meet a wide range of half sine test specifications, such as NHIS-90 ,NHIS-91, EN 60068-2-27, MIL STD 810E, BS 2011 and DEF STD 07-55.

Stand-alone design: The STM shock test machine is free standing and therefore can be placed directly on a standard laboratory floor. Because no external reaction mass is requires, costly alterations to the installation site are avoided. The machine is also easily transportable to other sites. Installation is straightforward; requiring only a high pressure airline and single phase AC power.