IMV - Electro Dynamic Vibration Tables

IMV Logo Transp 

offers a wide range of Air- & Water-Cooled Shakers as also under water Shakers or Inertial and Modal Shakers. In the product line of Controllers we find a wide variety of systems and software to controll and analyse test runs.

IMV A-Series

A series is the “new standard” in vibration testing, with a solid test performance. A series increases the relative excitation force and has a displacement of 51 mmp-p (2 inch stroke) which gives good balance between specification of velocity, acceleration and displacement.

It also provides a maximum of 3.5m/s shock velocity testing, which responds to the demand in lithium battery testing. Rapid creation of a test from a set of pre-defined templates conforming to most international test standards. Simply select the standard required to generate the main test settings.

IMV A-Series

A series is the “new standard” in vibration testing, with a solid test performance. A series increases the relative excitation force and has a displacement of 51 mmp-p (2 inch stroke) which gives good balance between specification of velocity, acceleration and displacement.

It also provides a maximum of 3.5m/s shock velocity testing, which responds to the demand in lithium battery testing. Rapid creation of a test from a set of pre-defined templates conforming to most international test standards. Simply select the standard required to generate the main test settings.

IMV A-Series

A series is the “new standard” in vibration testing, with a solid test performance. A series increases the relative excitation force and has a displacement of 76.2 mmp-p (3 inch stroke) which gives good balance between specification of velocity, acceleration and displacement.

It also provides a maximum of 3.5 m/s shock velocity testing, which responds to the demand in lithium battery testing. Rapid creation of a test from a set of pre-defined templates conforming to most international test standards. Simply select the standard required to generate the main test settings.

IMV A-Series

A series is the “new standard” in vibration testing, with a solid test performance. A series increases the relative excitation force and has a displacement of 76.2 mmp-p (3 inch stroke) which gives good balance between specification of velocity, acceleration and displacement.

It also provides a maximum of 3.5 m/s shock velocity testing, which responds to the demand in lithium battery testing. Rapid creation of a test from a set of pre-defined templates conforming to most international test standards. Simply select the standard required to generate the main test settings.

IMV A-Series

A series is the “new standard” in vibration testing, with a solid test performance. A series increases the relative excitation force and has a displacement of 76.2 mmp-p (3 inch stroke) which gives good balance between specification of velocity, acceleration and displacement.

It also provides a maximum of 3.5 m/s shock velocity testing, which responds to the demand in lithium battery testing. Rapid creation of a test from a set of pre-defined templates conforming to most international test standards. Simply select the standard required to generate the main test settings.

IMV A-Series

A series is the “new standard” in vibration testing, with a solid test performance. A series increases the relative excitation force and has a displacement of 76.2 mmp-p (3 inch stroke) which gives good balance between specification of velocity, acceleration and displacement.

It also provides a maximum of 3.5 m/s shock velocity testing, which responds to the demand in lithium battery testing. Rapid creation of a test from a set of pre-defined templates conforming to most international test standards. Simply select the standard required to generate the main test settings.

The STM5 has been developed to produce clean, highly reproducable half sine shocks of up to 2000g width of approx. 0.3ms. With a maximum payload of 5kg, this machine is popular with the watch- and small electro-components industry.

  • Highly reproducable resonance free half sine shocks
  • Bounce Catch Function
  • Direct payload attachment in three axis
  • IMPALA Control Software,
  • incl. Tolerance Monitor, Trends, Closed Loop, etc.
  • Integrated seismic mass
  • optional remote control API

 

The STM10 has been developed to produce clean, highly reproducable half sine shocks of up to 500g width of approx. 0.7ms. With a maximum payload of 10kg, this machine is popular with the watch- and small electro-components industry.

  • Highly reproducable half sine shocks
  • IMPALA Control Software,
  • incl. Tolerance Monitor, Trends, Closed Loop, etc.
  • Integrated seismic mass
  • Remote control

 

The STM10P has been developed to produce clean, highly reproducable half sine shocks of up to 1400g width of approx.0.4ms. With a maximum payload of 10kg, this machine is popular with the watch- and small electro-components industry.

  • Highly reproducable half sine shocks
  • IMPALA Control Software,
  • incl. Tolerance Monitor, Trends, Closed Loop, etc.
  • Integrated seismic mass
  • Remote control 

The STM50 has been developed to produce clean, highly reproducable half sine shocks of up to 600g width of approx. 1.0ms. With a maximum payload of 50kg and a shock repetition rate of 60/Minute, this machine is popular with  electro-components industry in the production screen testing environment. The STM50 is also suitable for environmental test labs.

  • Highly reproducible half sine shocks
  • IMPALA Control Software,
  • incl. Tolerance Monitor, Trends, Closed Loop, etc.
  • Integrated seismic mass
  • Remote control 

The STM50P has been developed to produce clean, highly reproducable half sine shocks of up to 1000g width of approx. 1.0ms. With a maximum payload of 50kg, this machine is popular with electro-components industry. The STM50P is suitable for environmental test labs.

  • Highly reproducable half sine shocks
  • IMPALA Control Software,
  • incl. Tolerance Monitor, Trends, Closed Loop, etc.
  • Integrated seismic mass
  • Remote control 

The STM100 has been developed to produce clean, highly reproducable half sine shocks of up to 600g width of approx. 1.0ms. With a maximum payload of 100kg, this machine is popular with the presision optics  industry. The STM100 is suitable for environmental test labs.

  • Highly reproducable half sine shocks
  • IMPALA Control Software,
  • incl. Tolerance Monitor, Trends, Closed Loop, etc.
  • Integrated seismic mass
  • Remote control 

The STM200 has been developed to produce clean, highly reproducable half sine shocks of up to 450g width of approx. 1.5ms. With a maximum payload of 200kg, this machine is popular with the munitions and battery testing industry.

  • Highly reproducable half sine shocks
  • IMPALA Control Software,
  • incl. Tolerance Monitor, Trends, Closed Loop, etc.
  • Integrated seismic mass
  • Remote control 

Enhanced system performance extends test capabilitiesVibration tests have become diversified and specifications have become increasingly strict.
i-series offer a user-friendly lineup with enhanced performance and durability.